A cost‑effective, dielectric dead‑end solution designed for short‑span, low‑tension ADSS fiber optic cables. Its simple, single‑layer design efficiently distributes axial load into radial compression, ensuring long‑term cable integrity and reliable performance.
High‑quality Type 430 stainless steel lashing wire, ideal for aerial cable installations. The .045″ diameter and 1200′ length provide strength and durability, making it a dependable choice for telecommunications and utility applications.
A Dead‑End Grip is used to securely terminate and tension overhead cable or strand. Its design provides a strong, reliable hold, making it ideal for installations where a fixed end is required, such as utility poles and antenna supports
Straight Suspension Clamps provide reliable support for cables on poles using a through‑bolt design. The through bolt also serves as the clamping element, and one or more nuts and washers can be added between the pole and the clamp to achieve the desired spacing. These clamps are ideal for cable runs with curvatures of less than 30°.
N/A
FTTx network system
GDI Technology, GDFOSC-D96/4 is one of the main equipment for user access points, applied for protective connection and distribution between two or more cables. The primary function is to connect distribution cable and indoor cable in the open air. It’s widely used in communication systems, cable TV, optical cable network systems and others by virtue of steady structure, good sealing performance and easy construction.
Features
N/A
FTTx network system
GDI Technology, GDFOSC-D48/2 is one of the main equipment for user access points, applied for protective connection and distribution between two or more cables. The primary function is to connect distribution cable and indoor cable in the open air. It’s widely used in communication systems, cable TV, optical cable network systems and others by virtue of steady structure, good sealing performance and easy construction.
Features
GDI-AGC03 series optical receiver is home optical receiver with optical fiber access as its ultimate goal. It is suitable for FTTH (fiber to the home) network fiber subscriber access terminals, enabling analog or digital signals to enter the home. The machine uses low-power photodetectors, GaAs and optical AGC technology to meet the fiber-to-the-home CATV reception needs. This device can increase WDM and achieve triple play.
The GD-1100W is Designed for FTTH (Fiber To The Home) networks.
Without the Power Supply can work normally.
Build-in WDM, 1310nm/1490nm optical bypass port to ONU (EPON, GPON & GEPON).
1550nm convert to RF for CATV.
N/A
White Fiber Patch Cord SM Simplex 5MTR
SC/APC-SMS5
Simplex SC/APC Fiber Optic Patch cord with G.657.B3 fiber are a suitable solution for FTTH end connection of ONT units, or in high-density switchboards where there is a risk of critical bending. The G.657.B3 fiber is resistant to 0.5 cm macro-bends, and thus ensures full transmission of the light signal even under difficult conditions of mechanical deformation.
N/A
White Fiber Patch Cord SM Simplex 3MTR
SC/APC-SMS3
Simplex SC/APC Fiber Optic Patch cord with G.657.B3 fiber are a suitable solution for FTTH end connection of ONT units, or in high-density switchboards where there is a risk of critical bending. The G.657.B3 fiber is resistant to 0.5 cm macro-bends, and thus ensures full transmission of the light signal even under difficult conditions of mechanical deformation.
