Patch Cord SC/APC-SMS5

November 29th, 2022 Posted by No Comment yet

MANUAL

N/A

SPEC SHEET

SC/APC-SMS5_EN_Spec

USES

  • Testing equipment
  • FTTX+LAN
  • Optical fiber CATV
  • Optical communication system
  • Telecommunication

PRODUCT DESCRIPTION:

White Fiber Patch Cord SM Simplex 5MTR
SC/APC-SMS5

Simplex SC/APC Fiber Optic Patch cord with G.657.B3 fiber are a suitable solution for FTTH end connection of ONT units, or in high-density switchboards where there is a risk of critical bending. The G.657.B3 fiber is resistant to 0.5 cm macro-bends, and thus ensures full transmission of the light signal even under difficult conditions of mechanical deformation.

FEATURES

  • Fiber Cable Type: Simplex Optical Fiber Cable
  • Fiber Type: SM G657.B3
  • Cable Jacket & Color: LSZH Jacket in White Color
  • Exterior cable diameter: 3.0mm
  • Patch Cable Length: Available in 1,3,5 meters
  • Connector Type on both sides: SC/APC to SC/APC
  • Insertion Loss (max.): SC/APC ≤0,3 dB
  • Return Loss: SC/APC ≥60dB

Patch Cord SC/APC-SMS3

November 29th, 2022 Posted by No Comment yet

MANUAL

N/A

SPEC SHEET

SC/APC-SMS3_EN_Spec

USES

  • Testing equipment
  • FTTX+LAN
  • Optical fiber CATV
  • Optical communication system
  • Telecommunication

PRODUCT DESCRIPTION:

White Fiber Patch Cord SM Simplex 3MTR
SC/APC-SMS3

Simplex SC/APC Fiber Optic Patch cord with G.657.B3 fiber are a suitable solution for FTTH end connection of ONT units, or in high-density switchboards where there is a risk of critical bending. The G.657.B3 fiber is resistant to 0.5 cm macro-bends, and thus ensures full transmission of the light signal even under difficult conditions of mechanical deformation.

FEATURES

  • Fiber Cable Type: Simplex Optical Fiber Cable
  • Fiber Type: SM G657.B3
  • Cable Jacket & Color: LSZH Jacket in White Color
  • Exterior cable diameter: 3.0mm
  • Patch Cable Length: Available in 1,3,5 meters
  • Connector Type on both sides: SC/APC to SC/APC
  • Insertion Loss (max.): SC/APC ≤0,3 dB
  • Return Loss: SC/APC ≥60dB

PatchCord SC/APC-SMS1

November 29th, 2022 Posted by No Comment yet

MANUAL

N/A

SPEC SHEET

SC/APC-SMS1_EN_Spec

USES

  • Testing equipment
  • FTTX+LAN
  • Optical fiber CATV
  • Optical communication system
  • Telecommunication

PRODUCT DESCRIPTION:

White Fiber Patch Cord SM Simplex 1MTR
SC/APC-SMS1

Simplex SC/APC Fiber Optic Patch cord with G.657.B3 fiber are a suitable solution for FTTH end connection of ONT units, or in high-density switchboards where there is a risk of critical bending. The G.657.B3 fiber is resistant to 0.5 cm macro-bends, and thus ensures full transmission of the light signal even under difficult conditions of mechanical deformation.

FEATURES

  • Fiber Cable Type: Simplex Optical Fiber Cable
  • Fiber Type: SM G657.B3
  • Cable Jacket & Color: LSZH Jacket in White Color
  • Exterior cable diameter: 3.0mm
  • Patch Cable Length: Available in 1,3,5 meters
  • Connector Type on both sides: SC/APC to SC/APC
  • Insertion Loss (max.): SC/APC ≤0,3 dB
  • Return Loss: SC/APC ≥60dB

PLC Fiber Splitter-16

November 1st, 2022 Posted by No Comment yet

MANUAL

N/A

SPEC SHEET

PLC-Splitter-16_EN_Spec

USES

  • Ideal for GPON, FTTH/FTTx network system

PRODUCT DESCRIPTION:

PLC Fiber Splitter-16 (1×16) Planar Lightwave Circuit (PLC) Mini Module Splitter with SC/APC termination.  Fabricated using silica optical waveguide technology to distribute optical signals accurately and evenly with minimal loss providing a low cost light distribution solution with small form factor and high reliability.

Features

Commonly used for connections in optical distribution box or network cabinet for Fiber to the point (FTTx) deployments, CATV links and other passive optical networks (e.g., GPON).

  • 900 μm input/output G.657A1
  • No splicing in PON system
  • Ideal for GPON, FTTH/FTTx
  • Clearcurve XB Bend Insensitive Fiber (BIF) glass

PLC Fiber Splitter 08

October 30th, 2022 Posted by No Comment yet

MANUAL

N/A

SPEC SHEET

PLC-Splitter-08_EN_Spec

USES

FTTx/PON network system

PRODUCT DESCRIPTION:

PLC Fiber Splitter-08 constructed with a protective stainless steel tube that insures an optimum connection to the optical network. PLC Fiber Splitter-08 works ideally with any enclosure. Solution-based engineering support to meet all FTTX/PON network requirements.

Features

• Split Input Signal Evenly into 8 Output Ports
• Low Insertion Loss ≤16.5dB
• Low PDL (Polarization Dependent Loss) ≤0.2dB
• Wide Operating Wavelength: 1260nm to 1650nm
• Fully Passive Optical Branching Device Water-proof design with IP-68 Protection level.